Step 1: Prepare equipment and development environment
Equipment Accessories List
| Accessory Name | Quantity | Description |
|---|---|---|
| Intelligent Camera Unit | 1 | Factory pre-installed |
| Lens | 1 | Not included in factory package |
| Lens Cover | 1 | Factory pre-installed, detachable |
| Power Interface Cable | 1 | Factory pre-installed |
| Gigabit Ethernet Cable | 1 | Factory pre-installed |
| 12V DC Power Adapter | 1 | Not included, needs to be purchased separately |
Equipment Installation
Mount the equipment onto the fixed bracket using four M68 screws, and then attach the fixed bracket to other components using another set of four M68 screws. There are two installation methods available, and you can choose the appropriate method based on actual needs.
As shown in the "Side Installation" and "Back Installation" diagrams:
Equipment Connection Topology
After installing the equipment, connect it to other peripherals for the initialization configuration. The connection topology diagram is as follows:
Method 1 (Recommended): Connect the camera via an Ethernet cable:
The camera device and the PC are directly connected through a network cable. Set the IP address of the PC to 192.168.1.254. After the camera device is powered on and started, enter the URL: http:// 192.168.1.123:58200/ from the PC browser to access the camera management. System, management system default user name sve, password sve
※The factory default IP of the camera is 192.168.1.123
※ PC running Windows, MacOS, or Ubuntu is supported.
Method 2: Directly operate the camera:
After powering up the camera device, connect the HDMI monitor, USB keyboard and mouse, and power on. After the device is started and the AidLux desktop system is entered, the following interface will be visible:
Click the [SV Engine] shortcut on the desktop, enter the username sve, password sve, and log in to the camera management interface.